DESCRIPTION A clear, colorless, hygroscopic liquid with a mild ammoniacal odor at temperatures higher than room temperature. At room temperature, the product is a white, crystalline solid.

STRUCTURE:
      / CH2CH2OH
NH
      \  CH2CH2OH

Mol. Wt: 105.14

Chemical Name: DIETHANOLAMINE

Synonyms

Diethanolamin, 2-2’Iminobisethanol, Bis(2-Hydroxyethyl)amine, DEA, Di(2-Hydroxyethyl)amine, Iminodiethanol.

CAS Number : 111 – 42 - 2

Specifications

Appearance at 25°C:    Clear Viscous Liquid
Color:                             Colorless to Pale Yellow
pH                                    10.0 - 12.0
% Water                           0.2 Max.
% Purity                           99.5 Min

Method of analysis

Methods of analysis are available upon request.

Typical Data

Chemical and Physical data Typical values

Specific Gravity, 20/20 ºC           1.08 – 1.10
Flash point °C                              About 138 

Solubility

The solubility at 20°C is as follows:
Water soluble

The specifications & properties listed above are for products manufactured in India.

Applications

An intermediate in the manufacture of cosmetics, surface-active agents used in textile specialties, herbicides, and petroleum demulsifies; as a gas scrubber in refinery and natural gas operations; waxes, polishes, and coatings emulsifiers; soluble oils; and corrosion inhibitors.

Handling and Storage:

Diethanolamine may be satisfactorily stored in carbon steel, stainless steel, or aluminum tanks using steel pipes and pumps. Caution must be exercised, however, to keep the material in the anhydrous state to prevent severe corrosion to the carbon steel or aluminum tank and related equipment. A drier on the breathing nozzle is recommended to help maintain anhydrous conditions in the storage tank.

For longer term color stability, it is recommended that the product be stored under an inert atmosphere. Solid sediment may form upon standing. There should be circulation in the storage vessel to keep solids suspended.

Low pressure steam coils in storage tanks and heat tracing of transfer lines should be provided in cases where low environmental temperatures may make pumping of the product difficult.

Further Information

For further information, technical service and samples, please contact our nearest Laffans Sales office or agent/distributor.    

The specifications & properties listed above are for products manufactured in India.

                                                                                               Issued: 2007-01-01